|
Apeks xtx 200 Tungsten All medium pressure ports are 3/8" UNF so that the reversible XTX second stage can mount to either side of the first stage. Balanced for superior performance The FSR Status comes standard with an environmental dry kit, keeping water and contaminants out and also improving the model's resistance to freezing Tough two shot moulded 300 bar DIN hand wheel Cosmetic ring and co-moulded yoke knob Compatible to EAN 40, new, out of the box Robust compact forged body 4 angled medium pressure ports 3/8" UNF 2 angled high pressure ports 7/16" UNF Removable Arcap valve RE-CHECKING STATUS DISPLAY The Status electronics "wake up" every 20 seconds and take a snapshot of the interstage pressure. If the pressure is greater than 3 Bar it will begin the process of displaying the pressure state or service state via the LCD display. After the display has switched off the electronics still wake up every 20 seconds, but even though there is pressure it does not display the pressure or service state again in order to conserve battery life. To enable the LCD to display again the regulator must be de-pressurized, then left for a minimum of 20 seconds where the pressure is zero. Upon re-pressurization the electronics will again display the pressure and/or service state. YOU MUST WAIT FOR A MINIMUM OF 20 SECONDS AFTER TURNING OFF THE GAS SUPPLY AND PURGING THE REGULATOR BEFORE OPENING THE CYLINDER VALVE AGAIN TO ALLOW STATUS TO
|
